No items found
ASM-60
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
Ideal for medium-sized transfer systems such as Bosch Rexroth TS2.
Ideal for medium-sized transfer systems such as Bosch Rexroth TS2.
ASMEL-680
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASM-605
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
With the ASM-605 stop module series, the stop does not automatically extend in its lowered position.
Instead, two additional air connections allow the stop to be extended and retracted independently.
This enables the stopper, with a custom stop geometry, to be used as a lowerable corner stop module, behind a lift transverse unit.
With the ASM-605 stop module series, the stop does not automatically extend in its lowered position.
Instead, two additional air connections allow the stop to be extended and retracted independently.
This enables the stopper, with a custom stop geometry, to be used as a lowerable corner stop module, behind a lift transverse unit.
ASMNG-80
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
Ideal for medium-sized transfer systems such as Bosch Rexroth TS2.
Ideal for medium-sized transfer systems such as Bosch Rexroth TS2.
ASMEL-1000
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASM-100
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASMEL-410
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASM-150
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASMEL-610
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASM-160
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
ASMEL-205
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
The stoppers of the ASMEL-205/-525/-1050/-1850 series differ from the stoppers of the ASMEL-200/-500/-680/-1000 series in that the stop performs a pivoting movement when damping and that the damping unit can be screwed out. So the damping effect can be adjusted. This means that lighter workpiece carriers can be damped and stopped with less propulsive force. The damping end position is reached more reliably.
The stoppers of the ASMEL-205/-525/-1050/-1850 series differ from the stoppers of the ASMEL-200/-500/-680/-1000 series in that the stop performs a pivoting movement when damping and that the damping unit can be screwed out. So the damping effect can be adjusted. This means that lighter workpiece carriers can be damped and stopped with less propulsive force. The damping end position is reached more reliably.
ASMNG-220
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.