Return stop ASR-005
Retrun stops prevent the workpiece carrier from bouncing back when stopping. The use of a backstop is always recommended when workpiece carriers are transported on a transfer system with low propulsive force. This is always the case, for example, with the accumulating roller chain as a conveying medium. The use of backstops is highly recommended at high transport speeds. Because the backstop “locks” or positions the workpiece carrier, a cycle time reduction can also be achieved.
Technical data
TYPE
Housing hard-anodized aluminium.
Stop hardened steel.
Minimum weight of pallet holder: 3 kg
Maximum weight of pallet holder: 1200 kg
SPRING FORCE
upper position: 2,2 N
lower position: 9,1 N
Functional scheme
Lowering: Only due to the workpiece carrier while crossing
close: via spring force
SCOPE OF SUPPLY
The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.
MAINTENANCE
No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.
Variants
ASR-005
With protective cap around the return lock latch -> good protection against filth