Stop module with damping
ASMREL-350
For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
Suitable for tight installation spaces, for example between the rollers in a roller conveyor system.
Technical data
EXECUTION AND WEIGHT
Electrically controlled stop module for roller conveyor systems.
Aluminum basic housing, hard-anodized.
Stop plate made from hardened steel.
Air damping system, adjustable with throttle screw.
Optimal damping of workpiece pallets up to a mass of 350 kg.
Weight of a ASMREL-350-DW-15-G5: 6,55 kg.
PROPULSIVE FORCES AND DAMPING
See informations under the “Operating range” button
CONNECTION G5
1x actuator connection M12x1, 5-pin to control the stop module.
1x sensor connection M12x1, 5-pin for transmitting the status signals of the stopper to the system control.
POWER SUPPLY AND POWER CONSUMPTION
24 VDC ± 15%
Residual current: 0,1 A
Rated current: 2,0 A
SPRING FORCES
In order to reset the stopper’s stop when lowering, a compression spring is installed that extends the stop. This spring force acts as a slight counterforce in the transport direction during damping and thus influences the minimum propulsion force.
MAINTENANCE WORK
No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the workpiece carrier.
POWER SUPPLY AND POWER CONSUMPTION
24 VDC ± 15%
Residual current: 0,1 A
Rated current: 2,0 A
Too many different variations? - Find the suitable product!
Variants
ASMREL-350-DW-15-G5
Double acting function, 15 mm lowering stroke
Connection G5: 5-pin connector M12x1 for actuators and sensors