Sensors

Corner stop module with a standard stop plate for workpiece carrier loads from 1 kg up to 90 kg.
Delivery including air connector 14010004 and fastening set 75000028
The mounting set is suitable for the attachment to the side of the conveyor section profile or for the attachment to a lift transverse unit, for example Bosch Rexroth HQ 2/… (Not suitable for HQ2/U2 and HQ2/…-H).
The angled stop plate is also part of the scope of delivery and can be replaced.
Identical to the Bosch Rexroth damper DA 2/10 and DA 2/30.

Corner stop module with standard stop plate for workpiece carrier loads from 1 kg up to 90 kg.
Possibility to query the retracted and extended stop plate position with the aid of T-slot magnetic field sensors.

Corner stop module with angled stop plate for workpiece carrier loads from 1 kg up to 90 kg.
Possibility to query the retracted and extended stop plate position with the aid of T-slot magnetic field sensors.

Corner stop module with standard stop plate for workpiece carrier loads from 1 kg up to 90 kg.
Heat-resistant up to 180°C.

Corner stop module with angled stop plate for workpiece carrier loads from 1 kg up to 90 kg.

Corner stop module with angled stop plate for workpiece carrier loads from 1 kg up to 90 kg.
Heat-resistant up to 180°C.

For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
Ideal for medium-sized transfer systems such as Bosch Rexroth TS2.

Electrically controlled stop module with air damping for workpiece carrier load from 3 kg up to 100 kg
Double acting function, 9 mm lowering stroke
Connection G5: 5-pin connector M12x1 for actuators and sensors

For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.

For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.

For stopping and separating of one or more accumulated workpiece carriers on a defined workpiece carrier stop surface.
The stoppers of the ASMEL-205/-525/-1050/-1850 series differ from the stoppers of the ASMEL-200/-500/-680/-1000 series in that the stop performs a pivoting movement when damping and that the damping unit can be screwed out. So the damping effect can be adjusted. This means that lighter workpiece carriers can be damped and stopped with less propulsive force. The damping end position is reached more reliable.

Stop module with damping for workpiece carrier loads from 40 kg up to 1050 kg
Single-acting function, by a single stroke control solenoid
9 mm lowering stroke via swivel joint
Query for upper position with inductive sensor
Query for stop plate in damped position with inductive sensor
Connection with rectangular connector