Stop module without damping ASUEL-30
For stopping and separating of one or more accumulated workpiece carriers a defined workpiece carrier stop surface.
Technical data
TYPE
For small transfer systems like Bosch Rexroth TS 1.
Lowering by electromagnet, up-movement via spring.
PRODUCT WEIGHT
ASUEL-30-EW-07-5: 0,68 kg
PROPULSIVE FORCE
In order to ensure a perfect lowering movement of the stop module, the following propulsive force must not be exceeded:
ASUEL-30-EW-07-5 = FRmax = 20,6 N
FUNCTION EW
EW (single-acting): The lowering of the stop module is done by electric energy.
In the de-energized state, the stop module moves upwards into the blocking position by a spring and the next workpiece carriers can be stopped.
INSTALLATION
The stop module is fastened using the side mounting holes for M6 screws.
CONNECTION
Connection with 5-pin M12x1 plug.
Voltage: 24 V DC,
Rated current: 2,0 A
CYCLE TIMES
Time – lower stop: 0,06 s
Time to rise stop: 0,06 s
Duty time 100%
TEMPERATURE RANGE
Standard version: +5°C up to +60°C
FURTHER TECHNICAL INFORMATION
See „Data sheet / operating manual’
in the ‘Downloads’ area
Too many different variations? - Find the suitable product!
Variants
ASUEL-30-EW-07-5
Single acting function, 7 mm lowering stroke
Lowering of the stop plat with integrated solenoid, raising up by compression spring
Connection with one connector, 5 pole, M12x1