Stop module without damping ASUEL-150
For stopping and separating of one or more accumulated workpiece carriers a defined workpiece carrier stop surface.
Technical data
TYPE
Variants with 9, 15, 25 and 40 mm lowering stroke available.
Suitable for various systems and applications.
With 9 mm lowering stroke, it is suitable for the Bosch Rexroth TS 2.
Suitable for many more transfer systems.
With 15 mm lowering stroke, it is very suitable for stopping KLT containers on gravity roller conveyors.
PRODUCT WEIGHT
ASUEL-150-DW-09-G5: 0,77 kg
ASUEL-150-DW-15-G5: 0,93 kg
ASUEL-150-DW-25-G5: 1,10 kg
PROPULSIVE FORCE
In order to ensure a perfect lowering movement of the stop module, the following propulsive force must not be exceeded:
ASUEL-150-DW-… -> FRmax = 103 N
FUNCTION DW
DW (double-acting): The lowering and raising of the stop module is done by electric energy.
In the de-energized state the stop module keeps his last reached position. The stop module has no spring.
INSTALLATION
The separator is fastened using the side mounting holes for M8 screws.
CONNECTION –G5
Connection for actuator and sensors with 5-pin M12x1 plugs.
CYCLE TIMES
ASUEL-150-DW-09-G5
Time – Lower stop: 0,3 s
Time – Rise stop: 0,16 s
ASUEL-150-DW-15-G5
Time – Lower stop: 0,42 s
Time – Rise stop: 0,25 s
ASUEL-150-DW-25-G5
Time – Lower stop: 0,65 s
Time – Rise stop: 0,42 s
TEMPERATURE RANGE
Standard version: +5°C up to +60°C
FURTHER TECHNICAL INFORMATION
See „Data sheet / operating manual’ in the ‘Downloads’ area