Stop module with adjustable air damping.
Basic housing made of hard anodized aluminum and stop plate made of hardened steel.

ASME-60-005: 0,32 kg
ASME-60-W-004: 0,33 kg
ASME-60-E-001: 0,33 kg
ASME-60-I-001: 0,32 kg

With two air connections:

To extend the stop: 380 mm²
To retract the stop, if possible: 301 mm²

Standard version: -20°C to +80°C
-H = Heat resistant -20°C to +180°C
-E = Version with „-E’-query: +5°C to +60°C

Operating pressure:
p_min = 4 bar
p_max = 8 bar

Compressed air quality:
ISO 8573-1 grade 4 or better

Size of the holes for air connection: M5

Cylinder volume for extending the stop : 6,96 cm³
Cylinder volume for retracting the stop: 5,43 cm³

The air consumption Q in “Norm litres” Nl can be calculated with these cylinder volumes and is specified in the operating manual

In the standard version, the position of the stop plate cannot be queried directly on the corner stop module.
For variants with “-E” in the type code, the stop plate positions can be queried using T-slot magnetic field sensors.
For variants with “-I” in the type code, the retracted stop plate position can be queried using inductive sensors.

The damping effect can be adjusted on the top of the device at the ASMS-60 und ASMSHS-60 series by using a slotted screwdriver. The setting direction is marked on the device. The marks have the following meaning:
+ … increased damping effect
– … reduce the damping effect.

No maintenance work is required.
The area around the stop must be clean and free of dirt and chips to ensure precise positioning of the workpiece carrier.

The devices in standard configuration are supplied without accessories.
The accessories are freely selectable and adapt to the ambient conditions.
For variants with a three-digit number at the end of the type code, accessories are sometimes included in the scope of delivery.