No items found
75000135
Fastening set, TS 2 - for mounting under the section with B = 1040 mm
Consisting of cross strut profile 45x90, 4x bracket 45x45 + fastening accessories.
Due to the width of the strut profile, it is recommended to use an additional support profile to prevent the cross strut profile from bending when the stopper is lowered.
Consisting of cross strut profile 45x90, 4x bracket 45x45 + fastening accessories.
Due to the width of the strut profile, it is recommended to use an additional support profile to prevent the cross strut profile from bending when the stopper is lowered.
75000136
Fastening set, TS 2 - for mounting under the section with B = 1200 mm
Consisting of cross strut profile 45x90, 4x bracket 45x45 + fastening accessories.
Due to the width of the strut profile, it is recommended to use an additional support profile to prevent the cross strut profile from bending when the stopper is lowered.
Consisting of cross strut profile 45x90, 4x bracket 45x45 + fastening accessories.
Due to the width of the strut profile, it is recommended to use an additional support profile to prevent the cross strut profile from bending when the stopper is lowered.
75000138
Fastening set, consisting of screws, hammer nuts, centering bolt.
For 8 mm profile slot
Usually for Asutec devices: ASUEL-35-EW-07
(The second centering pin is already present on both sides of the ASUEL-35-EW-07.)
For 8 mm profile slot
Usually for Asutec devices: ASUEL-35-EW-07
(The second centering pin is already present on both sides of the ASUEL-35-EW-07.)
75003004
Switch bracket for Sensor Ø12 or M12x1
To query the workpiece carrier position
from below. For ASU-800
To query the workpiece carrier position
from below. For ASU-800
75003004 Switch bracket
Switch bracket for Sensor Ø12 or M12x1
To query the workpiece carrier position
from below. For ASU-800
To query the workpiece carrier position
from below. For ASU-800
75003005
Switch bracket for Sensor Ø12 or M12x1
To query the workpiece carrier position
from below. For ASU-400, ASMS,
ASM-60, ASMHS-60
To query the workpiece carrier position
from below. For ASU-400, ASMS,
ASM-60, ASMHS-60
75003005 Switch bracket
Switch bracket for Sensor Ø12 or M12x1
To query the workpiece carrier position
from below. For ASU-400, ASMS, ASM-60, ASMHS-60
To query the workpiece carrier position
from below. For ASU-400, ASMS, ASM-60, ASMHS-60
75003006
Switch bracket, without fastening set
75003006 Switch bracket
Switch bracket for Sensor Ø12 or M12x1
To query the workpiece carrier position
from below.
Mounting on the inner groove of the section profile.
To query the workpiece carrier position
from below.
Mounting on the inner groove of the section profile.
75003006-150
Switch bracket, with fastening set for 10 mm profile slot
75003007
Switch bracket without fastening set
75003007 Switch bracket
Switch bracket, for Sensor Ø12 or M12x1
To query the workpiece carrier position from the side.
Mounting on the outer groove of the section profile.
To query the workpiece carrier position from the side.
Mounting on the outer groove of the section profile.