Slide stop ASMV-160

Asutec Slide Stops are designed to stop the workpiece pallets transverse movement and position it over the lift transfer unit for lowering on to the main conveyor section. The Slide Stops provide a high level of directional control to optimize your material traffic flow pattern.

TYPE

Pneumatic separator. Housing hard-anodized aluminium.
Stop plat made by hardened steel.

TEMPERATURE RANGE

Standard version: -20°C to +80°C

COMPRESSED AIR CONNECTION

4 air connections available:
P1:  Lower the stop plate
P2:  Position the stop plate
P3:  Retract the stop plate
P4:  Extend the stop plate

WEIGHT DATA

All weight data relates to the total weight of the pallet holder
(pallet with material), not the maxial force

SCOPE OF SUPPLY

The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Operating manual
Dimensions
Connection + Function
Overview of accessories
Step-file –> Downloadable below at the variants

75000046
Fastening set ASMV-160

14010004
Push-in L-tting
M5 for tubing O.D. 6 mm

14010006
Supply air one way ow valve
M5, for tubing O.D. 6 mm

15000004
Inductive sensor
M12x1, L = 45 mm
Sn = 4 mm

15010001
Plug connector, angled
M12x1, cable length 5 m

15030001
Clamp holder
M16x1 short version

Operating rangev = (m/min)69121518243036
ASMV-160-DW-17-IMass WT (kg)15 - 16015 - 13515 - 10515 - 10515 - 9515 - 7015 - 5015 - 40
ASMV-160-DW-17-I-001Mass WT (kg)8 - 308 - 258 - 228 - 208 - 188 - 158 - 138 - 12

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate.

Too many different variations - call us, we can help!

ASMV-160-DW-17-I

*Preferred variant*
Slide stop with damping for workpiece carrier loads from 15 kg up to 160kg.
Double acting function, 17 mm lowering stroke.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors. 
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    ASMV-160-DW-17-I-100

    *Preferred variant*
    Slide stop with damping for workpiece carrier loads from 15 kg up to 160kg.
    Double acting function, 17 mm lowering stroke.
    Without pneumatic pressure in upper position by spring force.
    Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
    4 air connections for independent movement of the stop plate and for lowering and raising up.
    “I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
    Delivery including air connectors 14010004 and fastening set 75000046.
    Identical to the Bosch Rexroth slide stop VA 2/D-130. 
    Step-file

      Title

      Your Name

      Your Company

      Your E-mail address

      Your Phone number

      ASMV-160-DW-17-I-001

      Customized version: For light workpiece carriers and narrow installation situation.
      Slide stop with damping for light workpiece carrier from 5 kg up to 25kg.
      Double acting function, 17 mm lowering stroke.
      Without pneumatic pressure in upper position by spring force.
      Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
      4 air connections for independent movement of the stop plate and for lowering and raising up.
      “I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
      Delivery including 3 air connectors 14010004, exhaust air throttle 14010048 and fastening set.
      All air connections on the backside – thus the device is mountable between a small return unit (b=240 mm).
      Without adapter plate – Fits only to the 50 mm wide TS 2-H section profile.
      Step-file

        Title

        Your Name

        Your Company

        Your E-mail address

        Your Phone number

        ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

        Comments are closed.

        ×

        We’ve moved

        You will find us at the following address:

        Asutec GmbH
        Großer Forst 9
        72622 Nürtingen
        Tel. +49 7022 / 2791 – 0