Separator without damping ASU-70

For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.

TYPE

For small transfer systems like Bosch Rexroth TS 1.
With throttle for regulating the lowering speed (quiet operation possible).

PRODUCT WEIGHT

ASU-70-EW-07-L: 0,29 kg
ASU-70-DW-07-L: 0,29 kg
Additional weight -E: 0,03 kg

PROPULSIVE FORCE

In order to ensure a perfect lowering movement of the stop module, the following propulsive forces must not be exceeded:
ASU-70-EW-07-L: FRmax = 170 N
ASU-70-DW-07-L: FRmax = 280 N

FUNCTION EW

EW (single-acting): The lowering of the stop module is done by pneumatic pressure.
In the unpressurized state, the stop module moves upwards into the blocking position by a spring and the next workpiece carriers can be stopped.
null

FUNCTION DW

DW (double-acting): The lowering and raising of the stop module is done by pneumatic pressure.
In unpressurized state the stop module keeps his last reached position. The stop module has no spring. This increases the lowering force.
null

INSTALLATION

The separator is fastened using the side mounting holes for M6 screws.

PNEUMATIC CONNECTION

M5 on the back.

TEMPERATURE RANGE

Standard version: -20°C to +80°C
-H = Heat resistant -20°C to +180°C
-E = Version with „-E'-query: +5°C to +60°C

FURTHER TECHNICAL INFORMATION

See „Data sheet / operating manual'
in the 'Downloads' area

Datasheet / Operating manual – PDF
Step-file – Downloadable below at the variants

Overview of the accessories for ASU-70 – PDF

75000004
Fastening set

14010004
Push-in L-fitting
M5, for tubing O.D. 6 mm

14010009
Push-in fitting
M5, for tubing O.D. 6 mm

14010006
Supply air one way flow valve
M5, for tubing O.D. 6 mm

15000004
Inductive sensor
M12x1, L = 45 mm, Sn = 4 mm

15000028
T-slot sensor, with aluminum body

15000000
T-slot sensor

15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m

15010001
Plug connector, angled,
M12x1, cable length 5 m

75003021
Switch bracket

Operating rangev = (m/min)69121518243036
ASU-70Mass WT (kg)0 - 700 - 600 - 300 - 250 - 200 - 120 - 60 - 4

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 170 N for the single acting stoppers ASU-70-EW-07-…
FRmax = 280 N for the double acting stoppers ASU-70-DW-07-…
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.

Too many different variations - Find the suitable stopper!

ASU-70-EW-07-L

* Preferred variant *
Separator without damping for workpiece carrier loads up to 70 kg
For small transfer systems like Bosch Rexroth TS 1
Single-acting function, 7 mm stroke
With throttle for regulating the lowering speed (quiet operation possible)
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    ASU-70-EW-07-L-100

    * Preferred variant *
    Separator without damping for workpiece carrier loads up to 70 kg
    For small transfer systems like Bosch Rexroth TS 1
    Single-acting function, 7 mm stroke
    With throttle for regulating the lowering speed (quiet operation possible)
    Delivery including air connection 14010004 and  fastening set 75000004
    Step-file

      Title

      Your Name

      Your Company

      Your E-mail address

      Your Phone number

      ASU-70-EW-07-L-H

      Separator without damping for workpiece carrier loads up to 70 kg
      For small transfer systems like Bosch Rexroth TS 1
      Heat resistant up to 180° C
      With throttle for regulating the lowering speed (quiet operation possible)
      Step-file

        Title

        Your Name

        Your Company

        Your E-mail address

        Your Phone number

        ASU-70-EW-07-E-L

        Separator without damping for workpiece carrier loads up to 70 kg
        For small transfer systems like Bosch Rexroth TS 1
        Single-acting function, 7 mm stroke
        With throttle for regulating the lowering speed (quiet operation possible)
        Query for upper and lower positions with electronic sensor
        Step-file

          Title

          Your Name

          Your Company

          Your E-mail address

          Your Phone number

          ASU-70-EW-07-E-L-100

          Separator without damping for workpiece carrier loads up to 70 kg
          For small transfer systems like Bosch Rexroth TS 1
          Single-acting function, 7 mm stroke
          With throttle for regulating the lowering speed (quiet operation possible)
          Query for upper and lower positions with electronic sensor
          Delivery including air connection 14010004 and fastening set 75000004
          Step-file

            Title

            Your Name

            Your Company

            Your E-mail address

            Your Phone number

            ASU-70-DW-07-L

            * Preferred variant *
            Separator without damping for workpiece carrier loads up to 70 kg
            For small transfer systems like Bosch Rexroth TS 1
            Double-acting function, 7 mm stroke
            With throttle for regulating the lowering speed (quiet operation possible)
            Step-file

              Title

              Your Name

              Your Company

              Your E-mail address

              Your Phone number

              ASU-70-DW-07-L-100

              * Preferred variant *
              Separator without damping for workpiece carrier loads up to 70 kg
              For small transfer systems like Bosch Rexroth TS 1
              Double-acting function, 7 mm stroke
              With throttle for regulating the lowering speed (quiet operation possible)
              Delivery including air connections 14010004 and fastening set 75000004
              Step-file

                Title

                Your Name

                Your Company

                Your E-mail address

                Your Phone number

                ASU-70-DW-07-L-H

                Separator without damping for workpiece carrier loads up to 70 kg
                For small transfer systems like Bosch Rexroth TS 1
                Double-acting function, 7 mm stroke, heat resistant up to 180 ° C
                With throttle for regulating the lowering speed (quiet operation possible)
                Step-file

                  Title

                  Your Name

                  Your Company

                  Your E-mail address

                  Your Phone number

                  ASU-70-DW-07-E-L

                  Separator without damping for workpiece carrier loads up to 70 kg
                  For small transfer systems like Bosch Rexroth TS 1
                  Double-acting function, 7 mm stroke
                  With throttle for regulating the lowering speed (quiet operation possible)
                  Query for upper and lower positions with electronic sensor
                  Step-file

                    Title

                    Your Name

                    Your Company

                    Your E-mail address

                    Your Phone number

                    ASU-70-DW-07-E-L-100

                    Separator without damping for workpiece carrier loads up to 70 kg
                    For small transfer systems like Bosch Rexroth TS 1
                    Double-acting function, 7 mm stroke
                    With throttle for regulating the lowering speed (quiet operation possible)
                    Query for upper and lower positions with electronic sensor
                    Delivery including air connections 14010004 and fastening set 75000004
                    Step-file

                      Title

                      Your Name

                      Your Company

                      Your E-mail address

                      Your Phone number

                      Additional variants on request: +49 (0)7022-2791-0

                      Comments are closed.

                      ×

                      We are moving!

                      From 01.01.2022 you will find us at the following address:

                      Asutec GmbH
                      Großer Forst 9
                      72622 Nürtingen
                      Tel. +49 (0)7022 / 2791 – 0