Separator without damping ASU-410

For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.

TYPE

Optimal protection against dripping liquids.
Suitable for use in dirty environments.

PRODUCT WEIGHT

ASU-410-…-09: 1,03 kg
ASU-410-…-09-E: 1,10 kg
ASU-410-…-09-I: 1,22 kg

PROPULSIVE FORCE

In order to ensure a perfect lowering movement of the stop module, the following propulsive forces must not be exceeded:
ASU-410-EW-09:  FRmax = 439 N
ASU-410-DW-09: FRmax = 563 N

FUNCTION EW

EW (single-acting): The lowering of the stop module is done by pneumatic pressure.
In the unpressurized state, the stop module moves upwards into the blocking position by a spring and the next workpiece carriers can be stopped.
null

FUNCTION DW

DW (double-acting): The lowering and raising of the stop module is done by pneumatic pressure.
In unpressurized state the stop module keeps his last reached position. The stop module has no spring. This increases the lowering force.
null

INSTALLATION

The stop Module is fastened using the side mounting holes for M8 screws.

PNEUMATIC CONNECTION

M5 on the back.

TEMPERATURE RANGE

Standard version: -20°C to +80°C
-E = Version with „-E“-query: +5°C to +60°C

FURTHER TECHNICAL INFORMATION

See „Data sheet / operating manual”
in the “Downloads” area

Datasheet / Operating manual – PDF
Step-file –> Downloadable below at the variants

Overview of the accessories for ASU-410 – PDF

75000051
Fastening set ASU-410

14010004
Push-in L-tting
M5, for tubing O.D. 6 mm

14010009
Push-in tting
M5, for tubing O.D. 6 mm

14010006
Supply air one way ow valve
M5, for tubing O.D. 6 mm

15000028
T-slot sensor
with aluminum body

15000000
T-slot sensor

15000004
Inductive sensor M12x1
L = 45 mm, Sn = 4 mm

15000000
T-slot sensor

15000004
Inductive sensor
M12x1, L = 45 mm, Sn = 4 mm

15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m

15010001
Plug connector, angled
M12x1, cable length 5 m

15030001
Clamp holder M16x1
short version

Operating rangev = (m/min)69121518243036
ASU-410Mass WT (kg)0 - 4100 - 3100 - 2600 - 2300 - 2100 - 1150 - 700 - 55

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 439 N for the single acting stoppers ASU-410-EW-09(-…)
FRmax = 563 N for the double acting stoppers ASU-410-DW-09(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.

Too many different variations - Find the suitable stopper!

ASU-410-…-09-100

With air connection 14010004
and fastening set 75000051

ASU-410-EW-09-E

Query option with T-slot
sensors (Magnetic eld sensors)

ASU-410-EW-09-I

Option to query the upper and
lower position using inductive
sensors

Additional variants on request: +49 (0)7022-2791-0

Comments are closed.

×

We are moving!

From 01.01.2022 you will find us at the following address:

Asutec GmbH
Großer Forst 9
72622 Nürtingen
Tel. +49 (0)7022 / 2791 – 0