For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.
Datasheet / Operating manual – PDF
Step-file –> Downloadable below at the variants
Overview of the accessories for ASU-400 – PDF
75000001
Fastening set A with long
guide sleeves and distortion lock
75000036
Fastening set
with long guide sleeves
75000002
Fastening set B
with short guide sleeves
14010004
Push-in L-fitting
M5, for tubing O.D. 6 mm
14010009
Push-in fitting
M5, for tubing O.D. 6 mm
14010006
Supply air one way flow valve
M5, for tubing O.D. 6 mm
15000028
T-slot sensor, with aluminum body
15000000
T-slot sensor
15000004
Inductive sensor
M12x1, L = 45 mm, Sn = 4 mm
15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m
15010001
Plug connector, angled,
M12x1, cable length 5 m
15030001
Clamp holder M16x1
short version
75003005
Switch bracket
Operating range | v = (m/min) | 6 | 9 | 12 | 15 | 18 | 24 | 30 | 36 |
ASU-400 | Mass WT (kg) | 0 - 400 | 0 - 300 | 0 - 250 | 0 - 220 | 0 - 200 | 0 - 110 | 0 - 65 | 0 - 50 |
The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 307 N for the single acting stoppers ASU-400-EW-09(-…)
FRmax = 409 N for the double acting stoppers ASU-400-DW-09(-…)
FRmax = 275 N for the single acting stoppers ASU-400-EW-15(-…)
FRmax = 384 N for the double acting stoppers ASU-400-DW-15(-…)
FRmax = 275 N for the single acting stoppers ASU-400-EW-25(-…)
FRmax = 353 N for the double acting stoppers ASU-400-DW-25(-…)
FRmax = 275 N for the double acting stoppers ASU-400-DW-40(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.
Comments are closed.