For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.
Data sheet (on request)
Step-file –> Downloadable below at the variants
Overview of the accessories for ASU-300 – PDF
14010008
Push-in L-fitting
G1/8, for tubing O.D. 6 mm
14010020
Push-in fitting
G1/8, for tubing O.D. 6 mm
14010005
Supply air one way flow valve
G1/8, for tubing O.D. 6 mm
15000002
Inductive sensor
M12x1, L = 65 mm, Sn = 2 mm
15010001
Plug connector, angled,
M12x1, cable length 5 m
15020002
Clamp holder M16x1
long version
Operating range | v = (m/min) | 6 | 9 | 12 | 15 | 18 | 24 | 30 | 36 |
ASU-300 | Mass WT (kg) | 0 - 300 | 0 - 225 | 0 - 125 | 0 - 90 | 0 - 60 | 0 - 35 | 0 - 20 | 0 - 15 |
The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop with mounted steel stop plate with a maximum high of 50 mm. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 590 N for the double acting stoppers ASU-300-DW-50(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop plate and the workpiece carrier.
Comments are closed.