Separator without damping ASU-140

For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.

TYPE

Pneumatic separator. Housing hard-anodized aluminium. Stop hardened steel.
Allowed pallet holder load up to 140 kg (see table).

WEIGHT DATA

All weight data relates to the total weight of the workpiece pallet (pallet with material), not the maxial force.

MAX. RAM PRESSURE

Dependent on friction between workpiece pallet and conveyor system, workpiece pallet and stop plate, pneumatical pressure and ambient conditions.

Temperature range

Standard version: -20°C to +80°C
-H = Heat resistant -20°C to +180°C

EW (SINGLE ACTING)

When depressurized the separator goes into the lock position via spring and the pallet will be stopped.

DW (DOUBLE ACTING)

When depressurized the separator keeps its last position.
The lowering force is higher as there is no spring.

CONNECTION

Pneumatic connection: M5
Working pressure: treated compressed air 4 – 8 bar

SCOPE OF SUPPLY

The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Data sheet (on request)
Step-file –> Downloadable below at the variants

Overview of the accessories for ASU-140 – PDF

14010004
Push-in L-fitting
M5, for tubing O.D. 6 mm

14010009
Push-in fitting
M5, for tubing O.D. 6 mm

14010006
Supply air one way flow valve
M5, for tubing O.D. 6 mm

15000004
Inductive sensor
M12x1, L = 45 mm, Sn = 4 mm

15010001
Plug connector, angled,
M12x1, cable length 5 m

75003005
Switch bracket

Operating rangev = (m/min)69121518243036
ASU-140Mass WT (kg)0 - 1400 - 1200 - 1000 - 1000 - 1000 - 500 - 300 - 25

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 315 N for the single acting stoppers ASU-140-EW-08(-…)
FRmax = 425 N for the double acting stoppers ASU-140-DW-08(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.

Too many different variations - Find the suitable stopper!

ASU-140-EW-08

* Preferred variant *
Separator without damping for workpiece pallets up to 140 kg
Single-acting function, 8 mm stroke
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    ASU-140-EW-08-H

    Separator without damping for workpiece pallets up to 140 kg
    Single-acting function, 8 mm stroke, heat resistant up to 180 °C
    Step-file

      Title

      Your Name

      Your Company

      Your E-mail address

      Your Phone number

      ASU-140-DW-08

      * Preferred variant *
      Separator without damping for workpiece pallets up to 140 kg
      Double-acting function, 8 mm stroke
      Step-file

        Title

        Your Name

        Your Company

        Your E-mail address

        Your Phone number

        ASU-140-DW-08-H

        Separator without damping for workpiece pallets up to 140 kg
        Double-acting function, 8 mm stroke, heat resistant up to 180° C
        Step-file

          Title

          Your Name

          Your Company

          Your E-mail address

          Your Phone number

          ASU-140-DW-08-K

          Separator without damping for workpiece pallets up to 140 kg
          Double-acting function, 8 mm stroke, cold resistant to -50° C
          Step-file

            Title

            Your Name

            Your Company

            Your E-mail address

            Your Phone number

            Additional variants on request: +49 (0)7022-2791-0

            ASU-140-EW-08-001

            Separator without damping for workpiece pallets up to 140 kg
            Double-acting function, 8 mm stroke
            Special stop plate with damping part of Vulkollan

            Comments are closed.

            ×

            We are moving!

            From 01.01.2022 you will find us at the following address:

            Asutec GmbH
            Großer Forst 9
            72622 Nürtingen
            Tel. +49 (0)7022 / 2791 – 0