SEPARATOR WITHOUT DAMPING ASUEL-30

For stopping of one or more accumulated workpiece carriers at a defined stop plate in conveyor systems or at the workpiece directly. The separator can also be used for positioning of for example pneumatic cylinders.

TYPE

For small transfer systems like Bosch Rexroth TS 1.
Lowering by electromagnet, up-movement via spring.

PRODUCT WEIGHT

ASUEL-30-EW-07-5: 0,68 kg

PROPULSIVE FORCE

In order to ensure a perfect lowering movement of the stop module, the following propulsive force must not be exceeded:
ASUEL-30-EW-07-5 -> FRmax = 20,6 N

FUNCTION EW

EW (single-acting): The lowering of the stop module is done by electric energy.
In the de-energized state, the stop module moves upwards into the blocking position by a spring and the next workpiece carriers can be stopped.

INSTALLATION

The stop module is fastened using the side mounting holes for M6 screws.

CONNECTION

Connection with 5-pin M12x1 plug.
Voltage: 24 V DC,
current consumption: 2,0 A

CYCLE TIMES

Time – lower stop: 0,06 s
Time to rise stop: 0,06 s
Duty time 100%

TEMPERATURE RANGE

Standard version: +5°C up to +60°C

FURTHER TECHNICAL INFORMATION

See „Data sheet / operating manual'
in the 'Downloads' area

Datasheet / Operating manual – PDF
Step-file –> Downloadable below at the variants

Overview of the accessories for ASUEL-30 – PDF

15010003
Plug connector, angled
5-pole, M12x1, cable length 5 m

Operating rangev = (m/min)691215182430
ASUEL-30Mass WT (kg)0 - 300 - 200 - 150 - 120 - 100 - 7,50 - 5

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 20,6 N for the single acting stoppers ASUEL-30-EW-07(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.

Too many different variations - Find the suitable stopper!

ASUEL-30-EW-07-5

Separator without damping for workpiece pallets up to 30 kg
Single-acting function, 7 mm stroke
Lowering by electromagnet-up by spring
Connection with a 5-pin connector M12x1

Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    I agree to receive news and product information from Asutec by newsletter.

    ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

    Comments are closed.

    ×

    We’ve moved

    You will find us at the following address:

    Asutec GmbH
    Großer Forst 9
    72622 Nürtingen
    Tel. +49 7022 / 2791 – 0