ELECTRIC SEPARATOR WITH DAMPING ASMEL-800

Stops, separates and damps one or more accumulated pallet holders at a defi ned pallet holder stop plate in conveyor systems or at the working
piece directly.

Type

Electrical separating stop with infinitely adjustable damping, hydraulic damping
Aluminum basic housing with hard-anodizing coating
Stop plate made from hardened steel
Optimum damping at pallet holder weights until 800 kg

MAX. RAM PRESSURE

Dependent on friction between workpiece pallet and conveyor system, workpiece pallet and stop plate, pneumatical pressure and ambient conditions.

MAXIMUM RAM PRESSURE

Dependent of the friction between work piece holder and the transfer system. Dependent of the friction between work piece holder and the stop plate. Dependent of the position of the work piece holder stop plate. Dependent of the ambient conditions (dust).

TEMPERATURE RANGE

+5°C up to + 60°C

SEPARATING FUNCTION

open       electrical
close       via spring loead

SPRING LOAD

Upper position 13.2 N
Lower position 29.7 N

ELECTRICAL DATA

Voltage 24 V
Duty cycle 100%
Current consumption 1.54 A

MAXIMUM-STOPPING WEIGHT

Data valid for a band friction of µ = 0.07 between the workpiece pallets and the conveyor systems for a standard Asutec stop plate. All weight data refers to the total weight of the pallet holder (pallet with work piece), not the axial force. These values refer to the installed oil damper. By installation of a different oil damper other values can be achieved for the same device size.

SCOPE OF SUPPLY

The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Data sheet
Step-file –> Downloadable below at the variants

15010004
Rectangular connectors, DIN EN 175301-803, cable length 5m

15030001
Mounting clamp M16x1, short Version

15000001
Inductive sensor M12x1, L=45mm, flush mountable

Operating rangev = (m/min)9121518243036
ASMEL-800Mass WT (kg)20 - 80020 - 45020 - 29020 - 20020 - 15020 - 10020 - 45

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate.
To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - Find the suitable electric stopper!

ASMEL-800-EW-D10-I

Electric Separator with infinitely adjustable damping
For pallet holder loads 20 – 800 kg
Double-acting function, by a single stroke control solenoid
10 mm stroke about pivot
Query for upper and lower positions with inductive sensor.
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

    Comments are closed.

    ×

    We’ve moved

    You will find us at the following address:

    Asutec GmbH
    Großer Forst 9
    72622 Nürtingen
    Tel. +49 7022 / 2791 – 0