The separating stop ASMEL-680-EW-D09-I stops, separates and damps one or more accumulated workpiece pallets at a defined stop surface on the workpiece pallet or directly at the conveyed workpiece.
|Operating range||v = (m/min)||9||12||15||18||24||30|
|ASMEL-680||Mass WT (kg)||60 - 680||60 - 560||60 - 410||60 - 340||60 - 170||60 - 85|
The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable separator, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Minimum propulsive force: The minimum propulsive force can be calculated using the formula FRmin = mmin · g · µ.
For ASMEL-680 -> FRmin = 41,2 N
This minimum propulsive force must not be less than this, in order to ensure that the stop can be pushed by the WT into its damped (retracted) position.
Maximum propulsive force:
ASMEL-680: FRmax = 467 N
This maximum propulsive force may not be exceeded in order to ensure a sufficient damping effect.
FRmax = 687 N: This maximum propulsive force may not be exceeded in order to ensure a sufficient force for lowering.
Comments are closed.