With the help of the product finder quickly to the right product
Technical bases for download
Damping

Conveyor speed
v =
m/min
Workplace pallet load
WT-load m = kg
Transport system / friction



Hint

For a friction factor <0.07μ, we recommend a return stop.

Do you have a reference product from another manufacturer?
Here you can request our Asutec product name:

Your input

Damping :

WT-load: m = kg

Conveyor speed: v = m/min

Transport system / friction : μ =

Results

No search results

HomeProducts Separators Separator with damping ElectricASMEL-200

ASMEL-200

ELECTRIC SEPARATOR WITH DAMPING ASMEL-200

The separating stop ASMEL-200-EW-D09-I stops, separates and damps one or more accumulated workpiece pallets at a defined stop surface on the workpiece pallet or directly at the conveyed workpiece.

TYPE

Electrical separating stop with self-adjusting damping unit
Aluminum basic housing, hard-anodized
Stop plate made from hardened steel
Optimal damping of workpiece pallets up to a mass of 200 kg

APPLICATION

Stopping, separating and damping of one or more accumulated
pallet holders at a defined pallet holder stop plate or at the
working piece directly.

MAXIMUM RAM PRESSURE

Dependent of:
– the friction between workpiece pallet and the transfer system.
– the friction between work piece holder and the stop plate.
– the position of the work piece holder stop plate.
– the ambient conditions (dust).

RAM PRESSURE

If a plurality of workpiece carriers accumulated in transfer systems before they get separated, it must be ensured that the release of the first workpiece holder, the total mass of the following stopped workpiece holders exceed the maximum weight at any time. (see table)

ELECTRICAL DATA

Voltage                     24 V
Duty cycle                100%
Current consumption 1.82 A

SEPARATING FUNCTION

open         electrical
close       via spring loead

TEMPERATURE RANGE

+5°C up to + 60°C

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Datasheet / Operating manual – PDF
Step-file –> Downloadable below at the variants

Accessories
Step-file –> Downloadable below at the variants

Operating rangev = (m/min)91215182430
ASMEL-200Mass WT (kg)30 - 20030 - 15030 - 17530 - 19030 - 20030 - 210

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable separator, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Minimum propulsive force: The minimum propulsive force can be calculated using the formula FRmin = mmin · g · µ.
For ASMEL-200 -> FRmin = 20,5 N
This minimum propulsive force must not be less than this, in order to ensure that the stop can be pushed by the WT into its damped (retracted) position.
Maximum propulsive force:
ASMEL-200: FRmax = 145 N
This maximum propulsive force may not be exceeded in order to ensure a sufficient damping effect.
FRmax = 687 N: This maximum propulsive force may not be exceeded in order to ensure a sufficient force for lowering.

Too many different variations - Find the suitable electric stopper!

Product finder

ASMEL-200-EW-D09-I

Separator with damping for workpiece carrier loads from 30 kg up to 200 kg
Single-acting function, by a single stroke control solenoid
9 mm lowering stroke via swivel joint
Query for upper position with inductive sensor
Query for stop plate in damped position with inductive sensor
Connection with rectangular connector
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    I agree to receive news and product information from Asutec by newsletter.

    Product inquiry

    ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

    Comments are closed.