ANGLE DAMPER HIGH-SPEED ASMEHS-60

Angle dampers ASME-60 damp the impact of accumulated pallet holders when changing over from a transverse to a longitudinal section and vice versa.

APPLICATION

Angle dampers ASMEHS-60 damp the impact of accumulated pallet holders when changing over from a transverse to a longitudinal section and vice versa.

TYPE

Pneumatical damper. Housing hard-anodized aluminium. Stop plate harde-ned steel. Allowed pallet holder load up to 70 kg (see table).

DAMPING

The damping force is self-adjusting in a certain area but can also be adjus-ted on the top of the separator.+ = increase damping force- = reduce damping force

TEMPERATURE RANGE

Standard version: -20°C to +80°C
-H = Heat resistant -20°C to +180°C
-E = Version with „-E'-query: +5°C to +60°C

MAINTENANCE

No maintenance is required

Data sheet
Downloadable below at the variants

75000029
Fastening set
For angle damper ASMEHS-60 and ASMEHS-60-W

14010009
Push-in fitting
Connection M5, for tubing O.D. 6mm

Arbeitsbereichv = (m/min)69121518243036
ASMEHS-60Mass WT (kg)1 - 701 - 451 - 401 - 371 - 351 - 281 - 211 - 12

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate. To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - call us, we can help!

ASMEHS-60

*Preferred variant*
Angle damper with a standard stop plate for workpiece carrier loads from 1 kg up to 60 kg.
Step-file

    Anrede

    Ihr Name

    Ihr Firmenname

    Ihre E-Mail-Adresse

    Ihre Telefonnummer

    ASMEHS-60-100

    Angle damper High-Speed for workpiece carrier loads from 1 kg up to 70 kg.
    With a standard stop plate and 30 mm damping stroke
    Delivery including air connector 14010004 and fastening set 75000029
    The mounting set is suitable for the attachment to the side of the conveyor section profile (ST) or for the attachment to a lift transverse unit, for example Bosch Rexroth HQ 2/U.
    The angled stop plate is also part of the scope of delivery and can be replaced.
    Step-file für Montage an ST

      Anrede

      Ihr Name

      Ihr Firmenname

      Ihre E-Mail-Adresse

      Ihre Telefonnummer

      Step-file für Montage an HQ

        Anrede

        Ihr Name

        Ihr Firmenname

        Ihre E-Mail-Adresse

        Ihre Telefonnummer


        ASMEHS-60-H

        Angle damper High-Speed for workpiece carrier loads from 1 kg up to 70 kg.
        With a standard stop plate and 30 mm damping stroke.
        Heat-resistant up to 180°C.
        Step-file

          Anrede

          Ihr Name

          Ihr Firmenname

          Ihre E-Mail-Adresse

          Ihre Telefonnummer

          ASMEHS-60-W

          Angle damper High Speed with angled stop plate for workpiece carrier loads from 1 kg bis 70 kg
          With angled stop plate und 30 mm damping stroke
          Step-file

            Anrede

            Ihr Name

            Ihr Firmenname

            Ihre E-Mail-Adresse

            Ihre Telefonnummer

            ASMEHS-60-W-H

            Angle damper High Speed with angled stop plate for workpiece carrier loads from 1 kg bis 70 kg
            With angled stop plate und 30 mm damping stroke.
            Heat-resistant up to 180°C.
            Step-file

              Anrede

              Ihr Name

              Ihr Firmenname

              Ihre E-Mail-Adresse

              Ihre Telefonnummer

              ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

              Comments are closed.

              ×

              We’ve moved

              You will find us at the following address:

              Asutec GmbH
              Großer Forst 9
              72622 Nürtingen
              Tel. +49 7022 / 2791 – 0