SEPARATOR FOR ROLLER CONVEYOR SYSTEMS ASMK-1000

Stops, separates and damps one or more accumulated pallet holders at a defi ned pallet holder stop plate in conveyor systems or at the working
piece directly.
After the workpiece pallet has pushed the stop plate slightly in and was damped, the insertion of the damping stroke is effected by pneumatic support. This ensures that the end position damping with security is achieved.

TYPE

Pneumatic separator. Housing hard-anodized aluminium.
Allowed pallet holder load up to 1000 kg (see table).

WEIGHT DATA

All weight data relates to the total weight of the workpiece pallet (pallet with material), not the maxial force.

MAX. RAM PRESSURE

Dependent on friction between workpiece pallet and conveyor system, workpiece pallet and stop plate, pneumatical pressure and ambient conditions.

WORKING LOAD

Upper position: 52 N
Lower position: 80 N

LOWERING STROKE

985 N with 6 bar

AIR CONSUMPTION

Air consumption circa in litre with 6 bar: 0,06 l for retract the stop plate
Air consumption circa in litre with 6 bar: 0,35 l for lower and extent the stop plate

EW (SINGLE ACTING)

When depressurized the separator goes into the lock position via spring and the pallet will be stopped.

CONNECTION

Pneumatic connection: G 1/8″
Working pressure: treated compressed air 4 – 8 bar

SCOPE OF SUPPLY

The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Overview of the accessories for ASMK-1000 – PDF

14010005
Supply air one way flow valve
G1/8, for tubing O.D. 6 mm

14010008
Push-in L-fitting
G1/8, for tubing O.D. 6 mm

14010020
Push-in fitting
G1/8, for tubing O.D. 6 mm

15000004
Inductive sensor
M12x1, L = 45 mm, Sn = 4 mm

15000033
Inductive sensor M8x1, L = 30 mm
Sn = 1,5 mm, 0,3 m cable
M12x1 connector

15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m

Operating rangev = (m/min)9121518243036
ASMK-1000Mass WT (kg)40 - 100040 - 90040 - 80040 - 70040 40040 - 25040 - 200

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate.
To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - Find the suitable stopper!

ASMK-1000-EW-20-I

Separator with damping for workpiece pallets from 40 kg up to 1000 kg
Single-acting function, 20 mm stroke
Assembly instruction

ASMK-1000-EW-20-I-002

* Preferred variant *
Separator with damping for workpiece pallets from 40 kg up to 1000 kg
Single-acting function, 20 mm stroke
Assembly instruction

ADDITIONAL VARIANTS ON REQUEST: +49 (0)7024-80594-0

Comments are closed.

×