ANGLE DAMPER ASME-60

Angle dampers ASME-60 damp the impact of accumulated pallet holders when changing over from a transverse to a longitudinal section and vice versa.

Type

Pneumatical damper. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 60 kg (see table).

WEIGHT DATA

All weight data relates to the total weight of the pallet holder
(pallet with material), not the axial force.

TEMPERATURE RANGE

Standard version: -20°C to +80°C
-H = Heat resistant -20°C to +180°C
-E = Version with „-E'-query: +5°C to +60°C

DAMPING

The damping force is self­adjusting in a certain area but can also be adjusted on the top of the separator.

+ = increase damping force
= reduce damping force

AIR CONSUMPTION

ca. 0,045 l air with 6 bar

CONNECTION

Pneumatic connection: M5

SCOPE OF SUPPLY

The items will be delivered without accessories.
Accessories can be freely selected according to the ambient conditions.
All supplied accessory parts are mounted by customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Data sheet 
Step-file –> Downloadable below at the variants

Overview of the accessories for ASME-60 – PDF

75000028
Fastening set ASME-60

14010004
Push-in L-fitting
M5, for tubing O.D. 6 mm

14010009
Push-in fittin
M5, for tubing O.D. 6 mm

14010004
Push-in L-fitting
M5, for tubing O.D. 6 mm

15000000
T-slot sensor

15000028
T-slot sensor
with aluminum body

15000004
Inductive sensor M12x1
L = 45 mm, Sn = 4 mm

15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m

15010001
Plug connector, angled
M12x1, cable length 5 m

15030001
Clamp holder M16x1
short version

Operating rangev = (m/min)69121518243036
ASME-60Mass WT (kg)1 - 601 - 401 - 351 - 321 - 301 - 241 - 181 - 10

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate. To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - call us, we can help!

ASME-60

*Preferred variant*
Angle damper with a standard stop plate for workpiece carrier loads from 1 kg up to 60 kg.
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    ASME-60-100

    *Preferred variant*
    Angle damper with a standard stop plate for workpiece carrier loads from 1 kg up to 60 kg.
    Delivery including air connector 14010004 and fastening set 75000028
    The mounting set is suitable for the attachment to the side of the conveyor section profile or for the attachment to a lift transverse unit, for example Bosch Rexroth HQ 2/U.
    The angled stop plate is also part of the scope of delivery and can be replaced.
    Identical to the Bosch Rexroth damper DA 2/10 and DA 2/30.
    Step-file

      Title

      Your Name

      Your Company

      Your E-mail address

      Your Phone number

      ASME-60-102

      Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
      Delivery including fastening set.
      The mounting set is suitable for the attachment to the side of the conveyor section profile.
      Two air connections for pneumatic extension and retraction of the stop plate.
      Step-file

        Title

        Your Name

        Your Company

        Your E-mail address

        Your Phone number

        ASME-60-W-102

        Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
        Delivery including fastening set.
        The mounting set is suitable for the attachment to a lift transverse unit, for example Bosch Rexroth HQ 2/U.
        Two air connections for pneumatic extension and retraction of the stop plate.
        Step-file

          Title

          Your Name

          Your Company

          Your E-mail address

          Your Phone number

          ASME-60-H

          Angle damper with a standard stop plate for workpiece carrier loads from 1 kg up to 60 kg.
          Heat-resistant up to 180°C.
          Step-file

            Title

            Your Name

            Your Company

            Your E-mail address

            Your Phone number

            ASME-60-W

            *Preferred variant*
            Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
            Step-file

              Title

              Your Name

              Your Company

              Your E-mail address

              Your Phone number

              ASME-60-W-H

              Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
              Heat-resistant up to 180°C.
              Step-file

                Title

                Your Name

                Your Company

                Your E-mail address

                Your Phone number

                ASME-60-I-001

                Angle damper for workpiece carrier loads from 1 kg up to 60 kg.
                Two air connections for pneumatic extension and retraction of the stop plate.
                Possibility to query the retracted stop plate position with the aid of an inductive sensor M12x1.
                Step-file

                  Title

                  Your Name

                  Your Company

                  Your E-mail address

                  Your Phone number

                  ASME-60-E

                  Angle damper with a standard stop plate for workpiece carrier loads from 1 kg up to 60 kg.
                  Possibility to query the retracted and extended stop plate position with the aid of T-slot sensors.
                  Step-file

                    Title

                    Your Name

                    Your Company

                    Your E-mail address

                    Your Phone number

                    ASME-60-E-001

                    Angle damper for workpiece carrier loads from 1 kg up to 60 kg.
                    Possibility to query the retracted and extended stop plate position with the aid of T-slot sensors.
                    Two air connections for pneumatic extension and retraction of the stop plate.
                    Step-file

                      Title

                      Your Name

                      Your Company

                      Your E-mail address

                      Your Phone number

                      ASME-60-004

                      Angle damper with special angled stop plate, for workpiece carrier loads from 1 kg up to 60 kg.
                      Two air connections for pneumatic extension and retraction of the stop plate.
                      Step-file

                        Title

                        Your Name

                        Your Company

                        Your E-mail address

                        Your Phone number

                        ASME-60-005

                        *Preferred variant*
                        Angle damper for workpiece carrier loads from 1 kg up to 60 kg.
                        Two air connections for pneumatic extension and retraction of the stop plate.
                        Step-file

                          Title

                          Your Name

                          Your Company

                          Your E-mail address

                          Your Phone number

                          ASME-60-W-004

                          Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
                          Two air connections for pneumatic extension and retraction of the stop plate.
                          Step-file

                            Title

                            Your Name

                            Your Company

                            Your E-mail address

                            Your Phone number

                            ASME-60-W-007

                            Angle damper with angled stop plate for workpiece carrier loads from 1 kg up to 60 kg.
                            Special feature: stop with rounded edges.
                            Two air connections for pneumatic extension and retraction of the stop plate.
                            Step-file

                              Title

                              Your Name

                              Your Company

                              Your E-mail address

                              Your Phone number

                              ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

                              Comments are closed.

                              ×

                              We’ve moved

                              You will find us at the following address:

                              Asutec GmbH
                              Großer Forst 9
                              72622 Nürtingen
                              Tel. +49 7022 / 2791 – 0