ANGLE DAMPER ASME-1200

Angle dampers ASME­-1200 damp the impact of accumulated pallet holders when
changing over from a transverse to a longitudinal section and vice versa.

TYPE

Pneumatical damper. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 1200 kg (see table).

WEIGHT DATA

All weight data relates to the total weight of the pallet holder
(pallet with material), not the maxial force.

MAX. RAM PRESSURE

Dependent on friction between workpiece holder and conveyor system,
workpiece holder and stop plate, pneumatical pressure and ambient conditions.

AIR CONSUMPTION

Retract: ASME-1200 ca. 0,055 l air at 6 bar
Extend: ASME-1200 ca. 0,026 l air at 6 bar

CONNECTION

Working pressure: treated compressed air 4 – 8 bar
P1: Pneumatic connection: G 1/8“ for pushing the stop forward into the starting position
P2: Pneumatic connection: G 1/8“ for inserting or holding the stop at the rear, damped position.
Only required in special cases!

SCOPE OF SUPPLY

The items will be delivered without accessories. Accessories can be freely selected according to the ambient conditions. All accessory parts supplied are mounted depending on customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Overview of the accessories for ASME-1200 – PDF

14010008
Push-in L-fitting G1/8
for tubing O.D. 6 mm

14010020
Push-in fitting G1/8
for tubing O.D. 6 mm

14010040
Silencer, G 1/8

15000000
T-slot sensor

15000028
T-slot sensor
with aluminum body

15000004
Inductive sensor M12x1
L = 45 mm, Sn = 4 mm

15010000
Plug connector, straight
3-pole, M8x1, cable length 5 m

15010001
Plug connector, angled
M12x1, cable length 5 m

15030001
Clamp holder M16x1
short version

Operating rangev = (m/min)9121518243036
ASME-1200Mass WT (kg)40 - 120040 - 110040 - 90040 - 85040 - 47540 - 30040 - 250

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate. To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - call us, we can help!

ASME-1200

Angle damper, for pallet holder loads up to 1200 kg
With standard stop plate
Assembly instruction

ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

Comments are closed.